B-STOCK. Produkt pochodzi ze zwrotu lub był użyty do testów na potrzeby naszego zespołu. Został sprawdzony i jest sprawny. Może posiadać drobne ślady użytkowania. Posiada pełną gwarancję.
Wszystkie produkty sprzedawane w naszym sklepie, które były otwierane są oznaczone jako B-STOCK.
--
Dzięki kompaktowej obudowie, wysokiej jakości dźwięku i innowacyjnej opcji podbicia głośności o 20dB, pierwotnie wydany w 2010 roku Videomic Pro, szybko zyskał renomę i stał się branżowym standardem mikrofonu dedykowanego do współpracy z konsumenckim sprzętem FOTO/VIDEO (kamery, DSLR).
VideoMic Pro Rycote to następca mikrofonu VideoMic Pro. To następny poziom!.
Aby podnieść poziom jaki oferował poprzednik, firma RODE wyposażyła nowy model w system antywstrząsowy Rycote Lyre® oraz w nową kapsułę, która zapewnia jeszcze wyższą czułość I niższe szumy własne, co pozytywnie wpłynęło na zachowanie mikrofonu w w sytuacjach wymagających solidnego system antywstrząsowego oraz jakość dżwięku nagrywanego przy użyciu tego mikrofonu.
System Rycote Lyre® jest powszechnie uważany za najlepsze rozwiązania antywstrząsowe dla mikrofonów. Cała konstrukcja wykonana jest z wytrzymałego tworzywa termplastycznego, przez co jest bardziej skuteczny w minimalizowaniu niepożądanych wibracji i jest praktycznie niezniszczalny.
Cechy szczególne:
- System antrzywstrząsowy Rycote Lyre,
- Nowa kapsuła z wyższą czułością i niższymi szumami własnymi,
- Pasmo przenoszenia: 40Hz – 20kHz,
- Czułość -32 dB re 1V/Pa (20mV @ 94dB SPL) ± 2dB @ 1KHz,
- Impedancja wyjścia: 200Ohm,
- Ekwiwalentny poziom szumu: 14dB,
- Dynamika: 120dB,
- Maksymalny SPL: 134dB,
- Stosunek sygnału do szumu: 80dB,
- Pojemnościowy mikrofon o broadcastowej jakości dzwięku,
- Kompaktowe rozmiary (150mm długości),
- Ultra lekki (85g),
- Zasilanie bateryjne 9V – ponad 70 godzin pracy (bateria alkaliczna),
*brak baterii w zestawie.
- Osłona przeciwwietrzna w zestawie,
- 3,5mm stereo mini-jack output (dual mono),
- High Pass Filter (flat, 80Hz),
- Przełącznik Level Control (-10dB, 0dB, +20dB),
- Stopka montażowa 3/8”,
B-STOCK. This is a product which has been returned by a customer within their 14-day money-back guarantee or opened by our team to test. Fully functional and come with a full warranty.
--
- Rycote® Lyre® shock mounting onboard
- All-new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6” length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register your microphone
The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Want to learn more about the microphones in the VideoMic range? Explore now and find your perfect VideoMic here.
VIDEOMIC PRO SPECIFICATIONS
- Acoustic Principle Line Gradient
- Active Electronics JFET impedance converter
- Capsule 0.50"
- Address Type End
- Frequency Range 40Hz - 20kHz (selected HPF @80)
- Output Impedance 200Ω
- Maximum SPL 134dBSPL
- Maximum Output Level 6.9mV (@ 1kHz, 1% THD into 1KΩ load)
- Sensitivity -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted) 14dBA
- Weight 85g
- Dimensions 100mmH x 75mmW x 170mmD
- Warranty 1 year with free extension to 10 years